Відео

So $8-10 in material cost for a sign that only sells for $24 on etsy...You must not value your time much.

I have been watching some of your videos, they are very helpful! Thank you for doing this! My newest project I’m trying to engrave glass beer steins… have you done this on the xtool p2? Do you have a video for that?

I was wondering what glues do you use to adhere acrylic together?

I got my first klaser just couple months ago... and everything I know is because if this guy and this channel. Thank you so much.

What is your opinion on the B4 20 having enough power vs the B4 30 for ~ 700 bucks more?? Thanks for your thoughts....

thank you for the video! big help, it is much appreciated!

how long do these signs last bhaiya

MERCI !!thank you so much for your vidéo .It helps me a lot

Hay awesome video 😊 so question on cardstock can you use black sandpaper or black art paper too?

Good video. Thanks!

Thankyou, very helpfull for a great gift for mom

I'm looking at getting a 1000w or 1500w laser removal machine to remove rust for car parts and other things. Is there one you would recommend?

It was good, Now I'm going to have to look and see if you have a better step by step video that can be follow along with. I'm subbed 😊

Please help me. Im doing a stamp with an area of 26mm by 9mm. But the letters are not precise sometimes it looks melted. What settings should I use? Its a rubber pad and Im using algolaser diy kit 5w.

What's the price

good info for the novice like me

Perhaps blk 3.0 or Vantablack would work well, the worlds blackest paint. Expensive way to do it.

Always can find the best answers for my laser engraving project!

Dear, i used sculpfun s30-10W to engrave triple glazed glass (6mm+1.52mm+6mm+16mm air space+13.5mm) glass. First try was ok, but 3 time glass cracked. Can you suggest the best way to engrave. Any contact to reach you.

and which settings should i do for 1.6W (1600mW) laser?

Calculator link is broken. Unlucky.

High quality research and Information sharing! Thanks

Nice video! The Commarker B4 appears to offer promising capabilities, particularly for metal engraving enthusiasts. However, when considering laser options, it's worth exploring the Monport laser machine as well. Renowned for its reliability, precision, and versatility, Monport lasers are favored by professionals and hobbyists alike. With Monport, you can expect exceptional performance and quality results across a wide range of materials and applications, making it a valuable addition to any engraving toolkit.

Super helpful video! Just assembled and started running my new Atezr L2 24W with roller rotary and Lightburn. Newbie question 1: Any advice on how to properly set the Origin (current position? user? absolute?) so I can avoid crashing into the rails. Second question: how does Home work when the rotary is in use? Thanks so much.

What kind of line interval did you use?

Do you know if this machine will mark numbers on nickel plating?

Wow, thank you for all of the information. I appreciate the time you took to explain and show the process.

13:25 if u use the zink paint is it food safe after lastering ?

Thank you for the great info!

Very good comparison, thank you

Thanks for this review! It was super helpful but could I get some suggestions? I ran my design using the following settings: Power :90 Speed :50 Lines per inch: 200 I have a lot of fine details and halftone accents that didn’t engrave through! What setting would you suggest for this? 😮

I was engraving with the power speed table from your other video to test my acrylic and there is a crack in every box, I'm using a comgrow z1 any idea why? Could it just be the acrylic I'm using?

Very thorough mate. Thanks for the video. Have you tried cutting gold or silver mirror acrylic with the diode laser?

Hey there - got very good results following your instructions for Glass (Bottles and Jars) with a 10 W Diode Laser and Galvanising Compound. Thanks a million! However I fail engraving wine glasses the thin glass all cracks all the time. Do you have respective suggestions regarding speed and power for that kind of work?

Do you laser on the side with paint or on the other side ?

Thank you for the video this was the most concise explanation I have seen and I have watched a ton of videos.

your the only person that explained the setting perfectly thank you so much.

i wish one of the lasers was UV laser ! nice details Sir

Informative video...actually already I wasted my money buying Atomstack X20 pro... They didnt clearly mentioned that it can't cut transperant acrylic... From my experience only it came to know that. My other requirement was to stencil cut on 0.05mm thick steel sheet, which also they mentioned in their cutting list. Even that was also not happening. At low power its not cutting, and as power increases, the metal sheet is melting, shrinking, wrinkles, dark ashes etc happening. Honey comb bed was used beneath.

i have 1600mW or 1.6w laser Engraver, Creality CV_01 Pro 450nM laser. So which settings is for mine laser and i need power scale for this how to make it?

Great and informative video! Thank you! Could you please recommend a beginner inexpensive laser engraver for glass 🙏👍

Absolutely amazing and detailed video! Thank you for all the effort you put into it 👍

Interesting indeed

My last letter looks different... why could it be?

Can you upload any image into the software??

is there a way to engrave deeper so that the stamped image is cleaner?

How to clean the laserlens?

You can actually engrave on glass without a coating, it's a process you need something black under the glass they won't ignite! It melt! Power and speed are very finicky from machine to machine I have done it and broke a lot of glass , um still trying to get the settings perfect. I'm using a Roly LaserMATIC 20w with it set to 10w . The way in this video is definitely better for beginners.

I have seen a video by James dean designs and had used a brasso metal cleaner to put a surface on the clear acrylic.

Thank you for the video .